Mechanical Technolocy Inc.

A smaller building may have a single, computerized HVAC controller that operates the direct digital control (DDC) system. However, a large building normally requires a more complex system of controllers, divided into separate sections called tiers. This is called the architecture of the system. First Tier The first tier is a central workstation, consisting of… more »

Here is an article that stresses the importance to a business in providing a safe work environment for it’s employees to avoid the potential health, legal and financial consequences of an arc flash incident. To read the entire article go to: http://www.safetyandhealthmagazine.com/articles/12001-avoiding-arc-flash#.VUdYBbIaJqR.linkedin

Electrical work is to be performed in a de-energized state unless energized work can be justified. Where energized work is permitted without justification, the company or organization can be subject to being fined for willful violations, which are the most expensive types of fines. They can also be subject to possible criminal charges where someone… more »

Electrical hazards cause more than 300 deaths and 4,000 injuries in the workplace every year. Because electricity isn’t very forgiving, these workplace injuries and accidents are disproportionately fatal and costly. Date: February 12th, 2015 Time: 10:00am – 3:00pm Location: 815 Cerise Rd. Lockwood Cost: $55.00 – includes Lunch Seminar will cover the following information: Electrical… more »

Mechanical Technology, Inc. will be presenting a class entitled: ELECTRICAL SAFETY : A Practical Guide to OSHA & NFPA 70 E This 5 hour class will cover a wide range of topics including: Electrical Hazards & Safety Concepts Training Qualified & Unqualified Workers Approach Boundaries & Arc Flash Hazards Choosing & Inspecting PPE Guidelines for… more »

Mechanical Technology will be providing a Combined High Pressure/Low Pressure boiler class September 23rd thru the 25th at our facility in Billings.  The class will be taught by Rich Rose who is a Montana State certified boiler instructor. For more information and to register please call  406-245-8340

May 27-29, 2014: 8:00am – 5:00pm Location: Mechanical Technology Inc. 815 Cerise Road Billings, MT 59101 *Dates and/or location subject to change. Cancellation if minimum number not met. Class size limited. These three-day seminars will cover the following topics: Introduction to Boilers & Associated Systems – Boiler Water Treatment Boiler Operation Procedures Boiler Operation Safety… more »